3com 5500-ei pwr Reference Guide

 

1-9 

: You can provide one of the following values for this argument. 

z

 

: Displays direct-connect route information 

z

 

: Displays OSPF route information. 

z

 

: Displays OSPF ASE route information. 

z

 

: Displays OSPF not-so-stubby area (NSSA) route information. 

z

 

: Displays RIP route information. 

z

 

: Displays static route information. 

: With this argument provided, this command displays the inactive route information. Without 

this argument provided, this command displays both active and inactive route information. 

: With this keyword specified, detailed information of routes in the active or inactive state is 

displayed. With this keyword not specified, brief information of only the routes in the active state is 
displayed. 

Use the display ip routing-table protocol command to display the route information of a specific 
protocol.  

# Display the summary of all direct-connect routes. 

<Sysname> display ip routing-table protocol direct 

DIRECT Routing tables: 

Summary count: 4 

DIRECT Routing tables status:<active>: 

Summary count: 3 

Destination/Mask 

 

Protocol   

Pre Cost  

Nexthop   

Interface 

20.1.1.1/32   DIRECT 

 

 

  0 0   127.0.0.1  InLoopBack0 

127.0.0.0/8   DIRECT 

 

 

  0 0   127.0.0.1  InLoopBack0 

127.0.0.1/32 

  DIRECT 

 

 

  0 0   127.0.0.1  InLoopBack0 

DIRECT Routing tables status:<inactive>: 

Summary count: 1 

Destination/Mask 

 

Protocol   Pre 

Cost  

Nexthop   

Interface 

210.0.0.1/32 

 

 

DIRECT    

0    

0   127.0.0.1  InLoopBack0 

For detailed description of the output information, see 

Any view 

None