Manualsbrain.com
  1. Manuals
  2. Brands
  3. 3com
  4. 5500-ei pwr
  5. Reference Guide

3com 5500-ei pwr Reference Guide

Download
Page of 1314
 
3-15 
Description 
Use the rip metricout command to configure an additional metric for RIP routes sent out of an 
interface. 
Use the undo rip metricout command to restore the default. 
By default, the additional metric of RIP routes sent out of an interface is 1. 
With the command configured on an interface, the metric of RIP routes sent on the interface will be 
increased. 
Related commands: rip metricin. 
Examples 
# Set the additional metric of RIP routes sent out of the interface VLAN-interface 10 to 2. 
<Sysname> system-view 
System View: return to User View with Ctrl+Z.  
[Sysname] interface Vlan-interface 10 
[Sysname-Vlan-interface10] rip metricout 2 
rip output 
Syntax 
rip output
 
undo rip output
 
View 
Interface view 
Parameters 
None 
Description 
Use the rip output command to enable an interface to transmit RIP packets.  
Use the undo rip output command to disable an interface from transmitting RIP packets.  
By default, all interfaces except loopback interfaces are enabled to transmit RIP packets. 
Related commands: rip input, rip work. 
Examples 
# Disable the interface VLAN-interface 10 from transmitting RIP packets. 
<Sysname> system-view 
System View: return to User View with Ctrl+Z.  
[Sysname] interface Vlan-interface 10 
[Sysname-Vlan-interface10] undo rip output