3com 5500-ei pwr Reference Guide

 

1-25 

System View: return to User View with Ctrl+Z. 

[Sysname] telnet source-interface Vlan-interface 2 

telnet source-ip ip-address 

undo telnet source-ip 

System view 

ip-address: IP address to be set. 

Use the telnet source-ip command to specify the source IP address for a Telnet client.  

Use the undo telnet source-ip command to remove the source IP address. 

With the telnet source-ip command configured, the specified IP address functions as the source IP 

address when a device logs into a Telnet server as a Telnet client, and the login succeeds only when 

there is a route between the specified source IP address and the Telnet server. 

Note that when the telnet source-ip command is executed, if the IP address specified is not an IP 

address of the local device, your configuration fails. 

# Set the source IP address to 192.168.1.1 for the Telnet client. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] telnet source-ip 192.168.1.1 

telnet-server source-interface interface-type interface-number 

System view 

interface-type interface-number: Interface type and interface number. 

Use the telnet-server source-interface command to specify the source interface for a Telnet server.  

Use the undo telnet-server source-interface command to remove the source interface.