3com 5500-ei pwr Reference Guide

 

1-6 

Table 1-4 display multicast forwarding-table command output description 

Multicast Forwarding Cache Table 

Multicast forwarding table 

Total 1 entries 

Total number of matched forwarding entries 

00001 

Serial number of the entry 

(10.0.0.4, 225.1.1.1) 

Multicast source and group addresses of the 
entry 

iif Vlan-interface2, 0 oifs 

The incoming interface of the multicast 
forwarding table is VLAN-interface 2, and the 
multicast forwarding table does not have an 
outgoing interface.  

Matched 122 pkts(183000 bytes), Wrong If 0 
pkts 

     Forwarded 122 pkts(183000 bytes) 

122 packets of totally 183,000 bytes match the 
(S, G) entry, and 0 error packets match the (S, 
G) entry.  

122 packets of totally 183,000 bytes have been 
forwarded. 

 

display multicast routing-table  [  group-address [ mask { mask | mask-length } ] | source-address 

[ mask { mask | mask-length } ] | incoming-interface { interface-type interface-number | register } ]* 

Any view 

group-address: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255. With this 

argument provided, the command displays the multicast routing entries for the specified multicast 

group.  

source-address: Multicast source address. With this argument provided, the command displays the 

multicast routing entries for the specified multicast source.  

mask: Mask of the multicast group address or multicast source address, 255.255.255.255 by default. 

mask-length: Mask length of the multicast group address or multicast source address. For a multicast 

group address, this argument is in the range of 4 to 32; for a multicast source address, this argument is 

in the range of 0 to 32. The system default is 32 in both cases. 

incoming-interface: Displays multicast routing entries that contain the specified incoming interface.  

interface-type interface-number: Specifies an interface by its type and number.  

register: Displays the routing entries in which the incoming interface is the PIM-SM register interface. 

Use the display multicast routing-table command to display the multicast routing table information.