3com 5500-ei pwr Reference Guide

 

1-1 

display dot1x [ sessions | statistics ] [ interface interface-list ] 

Any view 

sessions: Displays the information about 802.1x sessions. 

statistics: Displays the statistics on 802.1x. 

interface: Display the 802.1x-related information about a specified port. 

interface-list: Ethernet port list, in the form of interface-list=  {  interface-type interface-number [ to 

interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet 

port and interface-number is the number of the port. The string “&<1-10>” means that up to 10 port lists 

can be provided. 

Use the display dot1x command to display 802.1x-related information, such as configuration 

information, operation information (session information), and statistics. 

When the interface-list argument is not provided, this command displays 802.1x-related information 

about all the ports.  

The output information can be used to verify 802.1 x-related configurations and to troubleshoot. 

Related commands: reset dot1x statistics, dot1x, dot1x retry, dot1x max-user, dot1x port-control, 

dot1x port-method, dot1x timer. 

# Display 802.1x-related information. 

<Sysname> display dot1x  

Global 802.1X protocol is enabled 

 CHAP authentication is enabled 

 DHCP-launch is disabled 

 Handshake is enabled       

 Proxy trap checker is disabled 

 Proxy logoff checker is disabled 

 EAD Quick Deploy is enabled