3com 5500-ei pwr Reference Guide

 

1-9 

Table 1-2 Description on the fields of the display startup command 

Current Startup 
saved-configuration file 

The configuration file used for the current startup 

Next main startup 
saved-configuration file 

The main configuration file used for the next startup 

Next backup startup 
saved-configuration file 

The backup configuration file used for the next startup 

Bootrom-access enable state 

Whether you can use the user-defined password to access the 
Boot ROM: 

z 

enabled indicates you can access the Boot ROM with the 
user-defined password. 

z 

disabled indicates you cannot access the Boot ROM with the 
user-defined password. 

For related information, refer to the startup bootrom-access 
enable command in the File System Management part of the 
manual. 

 

display this [ by-linenum ] 

Any view 

by-linenum: Displays configuration information with line numbers. 

Use the display this command to display the current configuration performed in the current view. To 

verify the configuration performed in a view, you can use this command to display the parameters that 

are valid in the current view. 

Note that: 

z 

Effective parameters that are the same as the default are not displayed. 

z 

The configured parameter whose corresponding function does not take effect is not displayed. 

z 

Execution of this command in any user interface view or VLAN view displays the valid configuration 

parameters in all user interfaces or VLANs. 

Related commands: save,  reset saved-configuration,  display saved-configuration,  display 

current-configuration. 

# Display the configuration parameters that take effect in all user interface views. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] user-interface aux 0