3com 5500-ei pwr Reference Guide
1-38
Description
Use the display stop-accounting-buffer command to display the non-response stop-accounting
requests buffered in the device.
requests buffered in the device.
z
You can choose to display the buffered stop-accounting requests of a specified RADIUS scheme,
session (by session ID), or user (by username). You can also specify a time range to display those
generated within the specified time range. The displayed information helps you diagnose and
resolve RADIUS problems.
session (by session ID), or user (by username). You can also specify a time range to display those
generated within the specified time range. The displayed information helps you diagnose and
resolve RADIUS problems.
z
If the switch gets no response in a specified time period after sending a stop-accounting request to
a RADIUS server, it will buffer the request and transmit the buffered one until the maximum
number of transmission attempts (set by the retry stop-accounting command) is reached.
a RADIUS server, it will buffer the request and transmit the buffered one until the maximum
number of transmission attempts (set by the retry stop-accounting command) is reached.
Related commands: reset stop-accounting-buffer, stop-accounting-buffer enable, retry
stop-accounting
.
Examples
# Display the buffered stop-accounting requests generated from 0:0:0 08/31/2002 to 23:59:59
08/31/2002.
08/31/2002.
<Sysname> display stop-accounting-buffer time-range 00:00:00-08/31/2002
23:59:59-08/31/2002
Total find 0 record
key
Syntax
key
{ accounting | authentication } string
undo key
{ accounting | authentication }
View
RADIUS scheme view
Parameters
accounting
: Sets a shared key for RADIUS accounting messages.
authentication
: Sets a shared key for RADIUS authentication/authorization messages.
string
: Shared key to be set, a string of up to 16 characters.