3com 5500-ei pwr Reference Guide

 

1-46 

System view 

: Name of the RADIUS scheme to be created, a string of up to 32 characters. 

Use the radius scheme command to create a RADIUS scheme and enter its view. 

Use the undo radius scheme command to delete a specified RADIUS scheme. 

By default, a RADIUS scheme named "system" has already been created in the system. 

Note that: 

z

 

All the attributes of RADIUS scheme "system" take the default values, which you can see by using 
the display radius scheme command. 

z

 

The RADIUS protocol configuration is performed on a RADIUS scheme basis. For each RADIUS 
scheme, you should specify at least the IP addresses and UDP port numbers of the RADIUS 
authentication/authorization and accounting servers, and the parameters required for the RADIUS 
client to interact with the RADIUS servers. You should first create a RADIUS scheme and enter its 
view before performing RADIUS protocol configurations. 

z

 

A RADIUS scheme can be referenced by multiple ISP domains simultaneously. 

z

 

The undo radius scheme command cannot delete the default RADIUS scheme. In addition, you 
are not allowed to delete a RADIUS scheme which is being used by an online user. 

Related commands: key,  retry realtime-accounting,  scheme,  timer realtime-accounting, 

,  retry stop-accounting,  server-type,  state,  user-name-format, 

, display radius scheme, display radius statistics. 

# Create a RADIUS scheme named radius1 and enter its view. 

<Sysname> system-view  

System View: return to User View with Ctrl+Z. 

[Sysname] radius scheme radius1 

New Radius scheme 

[Sysname-radius-radius1] 

{ authentication-server-down | accounting-server-down }  

{ authentication-server-down | accounting-server-down }  

System view