3com 5500-ei pwr Reference Guide

 

1-57 

: Wait time before primary server state restoration, ranging from 1 to 255 minutes. 

Use the timer quiet command to set the time that the switch waits before it tries to re-communicate 
with the primary server and restore the status of the primary server to active. 

Use the undo timer quiet command to restore the default wait time. 

By default, the switch waits five minutes. 

Related commands: display radius scheme. 

# Configure the switch to wait 10 minutes before it tries to restore the status of the primary server to 
active. 

<Sysname> system-view  

System View: return to User View with Ctrl+Z. 

[Sysname] radius scheme radius1 

New Radius scheme 

[Sysname-radius-radius1] timer quiet 10 

 minutes 

RADIUS scheme view 

: Real-time accounting interval, in minutes. It ranges from 3 to 60 and must be a multiple of 3. 

Use the timer realtime-accounting command to set the real-time accounting interval. 

Use the undo timer realtime-accounting command to restore the default real-time accounting 
interval. 

By default, this interval is 12 minutes. 

Note that: 

z

 

To control the interval at which users are charged in real time, you can set the real-time accounting 
interval. After the setting, the switch periodically sends online users' accounting information to the 
RADIUS server at the set interval.