3com 5500-ei pwr Reference Guide

 

1-73 

HWTACACS scheme view 

: Wait time before primary server state restoration, ranging from 1 to 255 minutes. 

Use the timer quiet command to set the time that the switch waits before it tries to 
re-communicate with the primary server and restore the status of the primary server to active. 

Use the undo timer quiet command to restore the default wait time. 

By default, the switch waits five minutes. 

Related commands: display hwtacacs. 

# Configure the switch to wait 10 minutes before it tries to restore the status of the primary server 
to active. 

<Sysname> system-view  

System View: return to User View with Ctrl+Z. 

[Sysname] hwtacacs scheme hwt1 

[Sysname-hwtacacs-hwt1] timer quiet  10 

timer realtime-accounting minutes 

 

HWTACACS scheme view 

: Real-time accounting interval, in minutes. It ranges from 3 to 60 and must be a multiple 

of 3. 

Use the timer realtime-accounting command to set the real-time accounting interval. 

Use the undo timer realtime-accounting command to restore the default real-time accounting 
interval. 

By default, the real-time accounting interval is 12 minutes. 

Note that: