3com 5500-ei pwr Reference Guide

 

1-9 

web-authentication select method { shared | designated }  

Port view 

shared: Sets the Web authentication access method on the port to shared. 

designated: Sets the Web authentication access method on the port to designated. 

Use the web-authentication select command to enable Web authentication on the current port and set 

the Web authentication access method on the port. 

Use the undo web-authentication select command to disable Web authentication on the port. 

There are two Web authentication access methods: 

z 

shared: In this mode, the port allows multiple Web authentication users to be online at the same 

time. 

z 

designated: In this mode, the port allows only one Web authentication user to be online at a time. 

This configuration takes effect only when Web authentication is enabled globally. If Web authentication 

is not enabled globally, this configuration will only be saved. 

 

  Note: 

You are not allowed to enable Web authentication on a port if: 

z 

The port is an access port, or, 

z 

The port belongs to an aggregation group. 

 

# Enable Web authentication on Ethernet 1/0/1 and set the Web authentication access method to 

shared. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] interface Ethernet 1/0/1 

[Sysname-Ethernet1/0/1] web-authentication select method shared 

web-authentication timer idle-cut timer