3com 5500-ei pwr Reference Guide

 

2-7 

# Enter system view 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

# Enable the unauthorized-DHCP server detection function on the DHCP relay agent.  

[Sysname] dhcp-server detect 

dhcp-server groupNo ip ip-address&<1-8>  

undo dhcp-server groupNo 

System view 

groupNo: DHCP server group number, ranging from 0 to 19. 

ip-address&<1-8>: IP address of the DHCP server. &<1-8> indicates that up to eight IP addresses can 

be input, with any two IP addresses separated by a space.  

Use the dhcp-server ip command to configure the DHCP server IP address(es) in a specified DHCP 

server group. 

Use the undo dhcp-server command to remove all DHCP server IP addresses in a DHCP server 

group. 

Related commands: dhcp-server, display dhcp-server. 

# Enter system view. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

# Configure three DHCP server IP addresses 1.1.1.1, 2.2.2.2, and 3.3.3.3 for DHCP server group 1, so 

that this group contains three DHCP servers (server 1, server 2 and server 3). 

[Sysname] dhcp-server 1 ip 1.1.1.1 2.2.2.2 3.3.3.3 

display dhcp-security [ ip-address | dynamic | static | tracker ] 

Any view