3com 5500-ei pwr Reference Guide

 

1-5 

Table 1-2 Description on the fields of the display drv qacl_resource command 

block 

On the front panel,  

z 

From left to right, every four columns of FE 
ports (total of eight FE ports) represents a 
block numbered starting from 0. That is, 0 
indicates Ethernet 1/0/1 to Ethernet 1/0/4 and 
Ethernet 1/0/25 to Ethernet 1/0/28, 1 
indicates Ethernet 1/0/5 to Ethernet 1/0/8 and 
Ethernet 1/0/29 to Ethernet 1/0/32, and 2 
indicates Ethernet 1/0/9 to Ethernet 1/0/12 
and Ethernet 1/0/33 to Ethernet 1/0/36. 

z 

Every GE port represents a block numbered 
starting from 6. That is, 6 indicates 
GigabitEthernet 1/0/49, 7 indicates 
GigabitEthernet 1/0/50, 8 indicates 
GigabitEthernet 1/0/51, and 9 indicates 
GigabitEthernet 1/0/52. 

used-mask 

Number of the used masks 

used-rule 

Number of the used rules 

spare-mask 

Number of the remaining masks 

spare-rule 

Number of the remaining rules 

 

# Apply ACL 2001 to port GigabitEthernet 1/0/49. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] interface GigabitEthernet 1/0/49 

[Sysname-GigabitEthernet1/0/49] packet-filter inbound ip-group 2001  

Applying Acl 2001 rule 0 failed!  Reason: Resource unavailable!(GigabitEthernet1/0/49) 

The above output information shows that the application failed because there is no available rule 

resource on port GigabitEthernet 1/0/49. 

display packet-filter { interface interface-type interface-num | unitid unit-id } 

Any view 

interface interface-type interface-number: Displays information about packet filtering on the specified 

port.  

unitid unit-id: Displays information about packet filtering on the specified unit (when the switch is in a 

fabric) or packet filtering on all ports of the current switch (when the switch is not in a fabric). In the