3com 5500-ei pwr Reference Guide

 

1-3 

mirroring-group group-id { local | remote-destination | remote-source } 

undo mirroring-group { group-id | all | local | remote-destination | remote-source } 

System view 

group-id: Number of a port mirroring group, in the range 1 to 20. 

all: Specifies to remove all mirroring groups. 

local: Specifies the mirroring group as a local port mirroring group. 

remote-destination: Specifies the mirroring group as the destination mirroring group for 

remote port mirroring. 

remote-source: Specifies the mirroring group as the source mirroring group for remote 

port mirroring. 

Use the mirroring-group command to create a port mirroring group. 

Use the undo mirroring-group command to remove a port mirroring group. 

The mirroring group you created can take effect only after you configure other parameters 

for it. 

Note that, a Switch 5500-EI supports configuring only one destination port in local port 

mirroring or one reflector port in remote port mirroring. That is, on a Switch 5500-EI, there 

can be only one effective local mirroring group or one effective remote source mirroring 

group. The two mirroring groups cannot coexist.  

Related commands: display mirroring-group. 

# Create a port mirroring group on the local switch.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] mirroring-group 1 local 

mirroring-group group-id mirroring-port  mirroring-port-list  {  both | inbound | 

outbound } 

undo mirroring-group group-id mirroring-port mirroring-port-list