3com 5500-ei pwr Reference Guide

 

1-7 

Use the mirroring-group remote-probe vlan command to specify the remote-probe VLAN 

for a remote source/destination mirroring group. 

Use the undo mirroring-group remote-probe vlan command to remove the configuration 

of remote-probe VLAN for a remote source/destination mirroring group. 

Note that, before configuring a VLAN as the remote-probe VLAN for a remote 

source/destination mirroring group, you need to use the remote-probe vlan enable 

command to configure the VLAN as a remote-probe VLAN first.  

Related commands: display mirroring-group, remote-probe vlan enable. 

# Configure VLAN 100 as the remote-probe VLAN of remote source mirroring group 1. 

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] vlan 100 

[Sysname-vlan100] remote-probe vlan enable 

[Sysname-vlan100] quit 

[Sysname] mirroring-group 1 remote-source 

[Sysname] mirroring-group 1 remote-probe vlan 100 

mirroring-port { both | inbound | outbound } 

undo mirroring-port 

Ethernet port view 

both: Specifies to mirror all packets received on and sent from the port. 

inbound: Specifies to mirror the packets received on the port. 

outbound: Specifies to mirror the packets sent from the port. 

Use the mirroring-port command to configure the source port in Ethernet port view.  

Use the undo mirroring-port command to remove the configuration of the source port in 

Ethernet port view.  

Note that: 

z 

You cannot configure a member port of an existing mirroring group or a fabric port as 

a source port for port mirroring.