3com 5500-ei pwr Reference Guide

 

1-22 

delete-member member-id [ to-black-list ] 

Cluster view 

member-id: Member number of a member device, ranging from 1 to 255. 

to-black-list: Adds the device removed from a cluster to the blacklist to prevent it from being added to 

the cluster. 

Use the delete-member command to remove a member device from the cluster. 

Note that a cluster will collect the topology information at the topology collection interval. If you do not 

add a device to the cluster blacklist when removing it from the cluster, the device will be added to the 

cluster again when the cluster collects topology information. Therefore, to remove a device from a 

cluster permanently, you can use the following methods: 

z 

Use the delete-member  command with the to-black-list  keyword specified to remove a device 

and add the device to the blacklist of the cluster. 

z 

Before using the delete-member command to remove a device from the cluster, use the undo ndp 

enable  and undo ntdp enable command to disable NDP and NTDP on the ports of the device 

which connect with the cluster member devices.  

 

This command is applicable to management devices only. 

 

Related commands: add-member. 

# Remove the member device numbered 4 from the cluster, and add it to the cluster blacklist. 

<aaa_0.Sysname> system-view 

Enter system view, return to user view with Ctrl+Z. 

[aaa_0.Sysname] cluster 

[aaa_0.Sysname-cluster] delete-member 4 to-black-list