3com 5500-ei pwr Reference Guide

 

1-29 

ftp-server ip-address 

Cluster view 

ip-address: IP address of the FTP server to be configured for the cluster. 

Use the ftp-server command to configure a shared FTP server for the cluster on the management 

device. 

Use the undo ftp-server command to remove the shared FTP server setting. 

By default, the management device acts as the shared FTP server of the cluster. 

After you configure the IP address of the shared FTP server on the management device, the member 

devices in the cluster can access the shared FTP sever through the management device to back up 

configuration and download software. The IP address of the shared FTP server configured on the 

management device takes effect on the management device only and will not be applied to the member 

devices through the cluster management packets. 

After the IP address of the shared FTP server is configured, network address translation (NAT) is 

enabled on the management device immediately. When a member device uses the ftp cluster 

command to access the shared FTP server, the management device will translate the private IP 

address of the member device to a public network address, forward the requests of the member device 

to the FTP server, and forward the responses of FTP server to the member device according to the NAT 

record. 

# Configure FTP server 1.0.0.9 on the management device of a cluster. 

<aaa_0.Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[aaa_0.Sysname] cluster 

[aaa_0.Sysname-cluster] ftp-server 1.0.0.9 

holdtime seconds 

undo holdtime 

Cluster view