3com 5500-ei pwr Reference Guide

 

1-34 

# Reboot number-2 member device. 

<aaa_0.Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[aaa_0.Sysname] cluster 

[aaa_0.Sysname-cluster] reboot member 2 

snmp-host ip-address 

Cluster view 

ip-address: IP address of a SNMP network management station (NMS) to be configured for the cluster. 

Use the snmp-host command to configure a shared SNMP NMS for the cluster on the management 

device. 

Use the undo snmp-host command to remove the shared SNMP NMS setting. 

By default, no shared SNMP NMS is configured. 

After setting the IP address of an SNMP NMS for the cluster, the member devices in the cluster can 

send trap messages to the SNMP NMS through the management device. 

Note that, you can only use the commands on a management device. 

For how to configure a switch to send trap messages to the SNMP NMS, refer to Information Center 

Operation. 

# Configure SNMP NMS address 1.0.0.9 on the management device for the cluster. 

<aaa_0.Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[aaa_0.Sysname] cluster 

[aaa_0.Sysname-cluster] snmp-host 1.0.0.9 

tftp { cluster | tftp-server } get source-file [ destination-file ] 

User view