3com 8807 Reference Guide

C

HAPTER

 60: I

NFORMATION

 C

ENTER

Use the info-center timestamp command to configure the timestamp output 
format in debugging/trap information.

Use the undo info-center timestamp command to disable the output of 
timestamp field.

By default, date stamp is used.

# Configure the debugging information timestamp format as boot.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] info-center timestamp debugging boot 

info-center trapbuffer [ size buffersize | channel { channel-number | 
channel-name } ]*

undo info-center trapbuffer [ channel | size ]

System view

size: Configures the size of the trap buffer.

buffersize: Size of trap buffer (numbers of messages).

channel: Configures the channel to output information to trap buffer.

channel-number: Channel number, ranging from 0 to 9, that is, the system has ten 
channels.

channel-name: Channel name which can be the channel7, channel8, channel9, 
console, logbuffer, loghost, monitor, snmpagent, trapbuffer, logfile

Use the info-center trapbuffer command to output information to the trap 
buffer.

Use the undo info-center trapbuffer command to cancel output information to 
trap buffer.

By default, output information is transmitted to trap buffer and size of trap buffer 
is 256, that is, the trap buffer can hold 256 messages.

This command takes effect only after the system logging is enabled.

The information can be output to the trap buffer by configuring the size of the 
buffer.