3com 8807 Reference Guide

C

HAPTER

 11: E

THERNET

 L

INK

 A

GGREGATION

 C

ONFIGURATION

 C

OMMANDS

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] link-aggregation group 22 description myal1 

link-aggregation group agg-id mode { manual | static }

undo link-aggregation group agg-id

System view

agg-id: Aggregation group ID, in the range of 1 to 920. IDs 1 though 31 indicate 
manual or static aggregation groups; IDs 32 through 64 are reserved; IDs 65 
though 192 indicate Routed Trunks; IDs 193 through 920 indicate dynamic 
aggregation groups.

Use the link-aggregation group agg-id mode command to create an 
aggregation group.

Use the undo link-aggregation group command to delete an aggregation 
group.

Related command: display link-aggregation summary.

n 

■

In the manual aggregation mode, ports working at different rates can be 
aggregated. Manual aggregation can be load balancing aggregation if the 
aggregation resource is available. In this case, if the traffic rate shared by a 
low-rate port exceeds the maximum rate of the port, packets may be lost.

■

In the static aggregation mode, ports working at different rates can also be 
aggregated. However, the Selected/Standby state of statically aggregated ports 
is determined by the transmission rate. Only the ports with the maximum rate 
and in full-duplex mode can be selected to forward traffic, while other standby 
ports do not forward traffic.

# Create manual aggregation group 22.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] link-aggregation group 22 mode manual 

port link-aggregation group agg-id