3com 8807 Reference Guide
AAA Configuration Commands
315
means the user enables the function. This parameter only takes effect on the users
configured as Lan-access type. For other types of users, the display local-user
idle-cut enable and display local-user idle-cut disable commands will not
display any information.
configured as Lan-access type. For other types of users, the display local-user
idle-cut enable and display local-user idle-cut disable commands will not
display any information.
service-type: Configures to display local user of a specified type.
ftp means that the specified user type is FTP.
lan-access means that the specified user type is Lan-access which mainly refers to
Ethernet accessing users, 802.1x supplicants for example.
Ethernet accessing users, 802.1x supplicants for example.
ppp: Specifies PPP users.
ssh: Specifies SSH users.
telnet: Specifies Telnet users.
terminal: Specifies terminal users.
state { active | block }: Configures to display the local users in the specified state.
active means that the system allows the user requesting network service and
block means the system does not allow the user requesting network service.
active means that the system allows the user requesting network service and
block means the system does not allow the user requesting network service.
user-name user-name: Configures to display a local user specified with user-name
. user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding "/", ":", "*", "?", "<" and ">". The @
character can only be used once in one username. The pure username (the part
before @, namely the user ID) cannot exceed 55 characters.
. user-name is the argument specifying the username. It is a character string not
exceeding 32 characters, excluding "/", ":", "*", "?", "<" and ">". The @
character can only be used once in one username. The pure username (the part
before @, namely the user ID) cannot exceed 55 characters.
vlan vlanid: Configures to display the local users belonged to specified VLAN.
vlanid is the integer, ranging from 1 to 4094.
vlanid is the integer, ranging from 1 to 4094.
Description
Use the display local-user command to view the relevant information about all
the local users or the specified one(s).
the local users or the specified one(s).
The output can help you with the fault diagnosis and troubleshooting related to
local user.
local user.
By default, this command displays the relevant information about all the local
users.
users.
Related command: local-user.
Example
# Display the relevant information of all the local users.
<SW8800> display local-user
The contents of local user user1:
State: Active ServiceType Mask: None
Idle Cut: Disable
AccessLimit: Disable Current AccessNum: 0
Bind location: Disable
Vlan ID: Disable