3com 8807 Reference Guide
422
C
HAPTER
25: OSPF C
ONFIGURATION
C
OMMANDS
View
Any view
Description
Use the display debugging ospf command to view the debugging states of
global OSPF and all processes.
global OSPF and all processes.
Related command: debugging ospf.
Example
# Display the debugging states of global OSPF and all processes.
<SW8800> display debugging ospf
OSPF global debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
OSPF process 100 debugging state:
OSPF SPF debugging is on
OSPF process 200 debugging state:
OSPF SPF debugging is on
OSPF LSA debugging is on
display ospf abr-asbr
Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
processes if you do not specify a process ID.
Description
Use the display ospf abr-asbr command to view the information about the ABR
and ASBR of OSPF.
and ASBR of OSPF.
Example
# Display the information of the OSPF area border routers and autonomous system
border routers.
border routers.
<SW8800> display ospf abr-asbr
OSPF Process 1 with Router ID 10.110.98.138
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination Area Cost Nexthop Interface
IA 2.2.2.2 0.0.0.0 10 10.153.17.89 Vlan-interface1
Table 54 Description of the fields of the display ospf abr-asbr command
Field
Description
Destination
Router ID of the ABR or ASBR
Area
Area where the router is connected with ASBR
Cost
The routing overhead value of the route