3com 8807 Reference Guide

IS-IS view

acl-number: ACL number. It is in the range of 2000 to 3999, which means basic 
ACLs and advanced ACLs can be used.

Use the import-route isis level-2 into level-1 command to enable routing 
information in a Level-2 area to be imported to a Level-1 area.

Use the undo import-route isis level-2 into level-1 command to remove the 
function.

During routing leak configuration from Level-2 to Level-1, only the routes that are 
permitted by ACL can be imported to Level-1 area if an ACL has been specified.

By default, routing information in a Level-2 area is not imported to a Level-1 area.

Related command: import-route.

# Import routing information of a router from a Level-2 area to a Level-1 area 
through the ACL.

[SW8800] isis

 

[3Com-isis] import-route isis level2 into level1 acl 2100 

isis [ tag ]

undo isis [ tag ]

System view

tag: The name given to the ISIS process. The name length should be no longer 
than 128 characters, and it can be 0, which means null.

Use the isis command to start the corresponding IS-IS routing process and enter 
the ISIS view.

Use the undo isis command to delete the specified IS-IS routing process.

By default, IS-IS routing process is not started

For the normal operation of the IS-IS protocol, the isis command must be used to 
enable the IS-IS process. Then the network-entity command is used to set a 
Network Entity Title (NET) for the router. And, at last, the isis enable command is