3com 8807 Reference Guide

Use the display users command to view the information of the user interface.

# Display the information of the current user interface.

<SW8800> display users

 

UI    Delay     Type   Ipaddress     Username

 

+ 0   CON 0   00:00:00 

flow-control { hardware | none | software }

User interface view

hardware: Configures to perform hardware flow control.

none: Configures no flow control.

software: Configures to perform software flow control.

Use the flow-control command to configure the flow control mode on the user 
interface.

Use the undo flow-control command to restore the default flow control mode.

By default, the value is none. That is, no flow control will be performed.

This command can only be performed in Console and AUX user interface view.

# Configure software flow control on AUX port.

<SW8800>system-view

 

System View: return to User View with Ctrl+Z.

 

Table 5   Description on the fields of the display users command

+ 

Current user interface is in use and work in asynchronous mode. 

UI 

Number of the first list is the absolute number of user interface. Number of the 
second list is the relative number of user interface. 

Delay 

Indicates the interval from the latest input till now in seconds. 

Type 

User type 

IPaddress  Displays initial connection location, namely the host IP address of the incoming 

connection. 

Username  Display the name of the user using this user interface, namely the login username 

of the user.