3com 8807 Reference Guide

Page of 1099
588
C
HAPTER
 33: M
ULTICAST
 C
OMMON
 C
ONFIGURATION
 C
OMMANDS
display multicast 
forwarding-table
Syntax
display multicast forwarding-table [ group-address [ mask { mask | 
mask-length } ] | source-address [ mask { mask | mask-length } ] | 
incoming-interfaceinterface-type interface-number | null NULL-interface- 
number
 | register} ] *
View
Any view
Parameter
group-address: Multicast group address, used to specify a multicast group, 
ranging from 224.0.0.0 to 239.255.255.255.
source-address: Unicast IP address of the multicast source.
incoming-interface: Incoming interface of the multicast forwarding table entry.
interface-type interface-number: Interface type and interface number.
null: Incoming-interface is null.
NULL-interface-number: The only number is 0.
register: Register interface of PIM-SM.
Description
Use the display multicast forwarding-table command to view the information 
of multicast forwarding table.
CAUTION: You must use multicast routing-enable command in system view to 
enable IP multicast routing before you can view the multicast forwarding table 
information.
Related command: display multicast routing-table.
Table 81   Description on the fields of the display mpm group command
Field 
Description 
Vlan(id):2. 
The output information is about VLAN 2. 
Router port(s):Ethernet2/1/1 
The router port concerned is Ethernet2/1/1. 
IP group(s):the following ip group(s) 
match to one mac group. 
Lists the IP multicast groups matching the same MAC 
multicast group. 
IP group address:230.45.45.1 
The IP address of the IP multicast group is 
230.45.45.1. 
Member port(s):Ethernet2/1/2 
Ethernet2/1/2 port is a member port of the IP 
multicast group. 
MAC group 
address:01-00-5e-2d-2d-01 
The MAC address of the MAC multicast group is 
01-00-5e-2d-2d-01. 
Member port(s):Ethernet2/1/2 
Ethernet2/1/2 port is a member port of the MAC 
multicast group.