3com 8807 Reference Guide

In addition, this command can also display the BSR and static RP information.

# View the RP information of multicast group.

<SW8800> display pim rp-info

 

PIM-SM RP-SET information:

 

    BSR is: 20.20.20.20

 

 
    Group/MaskLen: 224.0.0.0/4

 

      RP 20.20.20.20

 

        Version: 2

 

        Priority: 0

 

        Uptime: 00:00:05

 

        Expires: 00:02:25

 

        Adv-Period: 60 seconds

 

        Holdtime: 150 seconds 

The following table details the display information.

System view

None

Use the pim command to enter the PIM view and configure the PIM global 
parameters. Note that the command does not enable the PIM protocol.

Use the undo pim command to return to system view, clear the PIM global 
parameters configured before and clear the PIM view.

Table 91   Description on the fields of display pim rp-info

PIM-SM RP-SET information: 

RP information 

BSR is: 4.4.4.6 

BSR is the virtual interface of the node 4.4.4.6. 

Group/MaskLen: 224.0.0.0/4

RP 4.4.4.6

Version: 2

Priority: 0

Uptime: 00:39:50

Expires: 00:01:40

Adv-Period: 60 seconds

Holdtime: 150 seconds 

The RP with IP address 224.0.0.0 and mask length of 4 is the 
virtual interface of the node 4.4.4.6, in version 2 and priority 0; 
it has been active for 39 minutes and 50 seconds and shall 
expire in one minute and 40 seconds; the advertisement 
interval is 60 seconds and holdtime is 150 seconds.