3com 8807 Reference Guide
MSDP Configuration Commands
647
[SW8800] msdp
[3Com-msdp] peer 110.10.10.1 minimum-ttl 10
peer request-sa-enable
Syntax
peer peer-address request-sa-enable
undo peer peer-address request-sa-enable
View
MSDP view
Parameter
peer-address: Address of MSDP peer.
Description
Use the peer request-sa-enable command to enable the router to send SA
request message to the specified MSDP peer when receiving a new group join
message.
request message to the specified MSDP peer when receiving a new group join
message.
Use the undo peer request-sa-enable command to remove the configuration.
By default, when receiving a new group join message, the router sends no SA
request messages to MSDP peers but waits to receive the next SA message.
request messages to MSDP peers but waits to receive the next SA message.
Related command: cache-sa-enable.
Example
# Configure to send SA request message to the MSDP peer 125.10.7.6.
<SW8800> system-view
System View: return to User View with Ctrl+Z.
[SW8800] msdp
[3Com-msdp] peer 125.10.7.6 request-sa-enable
peer sa-cache-maximum
Syntax
peer peer-address sa-cache-maximum sa-limit
undo peer peer-address sa-cache-maximum
View
MSDP view
Parameter
peer-address: Address of MSDP peer.
sa-limit: Maximum value that the SA cache allows, ranging from 1 to 2048.
Description
Use the peer sa-cache-maximum command to limit the number of caches
originated when the router receives SA messages from an MSDP peer.
originated when the router receives SA messages from an MSDP peer.