3com 8807 Reference Guide

C

HAPTER

 38: MBGP M

ULTICAST

 E

XTENSION

 C

ONFIGURATION

 C

OMMANDS

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] bgp 100

 

[3Com-bgp] ipv4-family multicast

 

[3Com-bgp-af-mul] 

network ip-address [ address-mask ] [ route-policy route-policy-name ]

undo network ip-address [ address-mask ] [ route-policy route-policy-name ]

IPv4 multicast sub-address family view

ip-address: Network address that BGP advertises.

address-mask: Mask of the network address.

route-policy policy-name: Route-policy applied to the routes advertised.

Use the network command to configure the network addresses to be sent by the 
local MBGP.

Use the undo network command to remove the configuration.

By default, the local MBGP does not send any route.

# Advertise routes to network segment 10.0.0.0/16.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] bgp 100

 

[3Com-bgp] ipv4-family multicast

 

[3Com-bgp-af-mul] network 10.0.0.1 255.255.0.0 

peer group-name advertise-community

undo peer group-name advertise-community

IPv4 multicast sub-address family view

group-name: Name of the peer group.

Use the peer advertise-community command to set to send community 
attributes to a peer group.