3com 8807 Reference Guide

C

HAPTER

 40: BGP/MPLS VPN C

ONFIGURATION

 C

OMMANDS

group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric 
characters.

peer-address: Peer IP address in dotted decimal notation.

keepalive-interval: Interval, in seconds, of sending the Keepalive message. It 
ranges from 1 to 65535 and defaults to 60.

holdtime-interval: Holdtime, in seconds. It ranges from 3 to 65535 and defaults to 
180.

Use the peer timer command to set the Keepalive interval and holdtime for peers.

Use the undo peer timer command to restore the default setting.

The timer set with the peer timer command enjoys higher precedence than the 
timer with the timer command.

Related command: timer keep-alive hold.

# Set the Keepalive interval and holdtime for the peer group test.

[3Com-bgp-af-vpn-instance] peer test timer keep-alive 60 hold 180 

peer peer-address upe

undo peer peer-address upe

VPNv4 sub-address family view

peer-address: Peer IP address.

Use the peer upe command to configure BGP peer as the UPE of hierarchical 
BGP/MPLS VPN.

Use the undo peer upe command to delete this configuration.

# Configure BGP peer as the UPE of hierarchical BGP/MPLS VPN.

[3Com-bgp] ipv4-family vpnv4

 

[3Com-bgp-af-vpn] peer 1.1.1.1 upe 

peer group-name vpn-instance vpn-instance-name enable