3com 8807 Reference Guide

C

HAPTER

 41: MPLS VLL C

ONFIGURATION

 C

OMMANDS

[3Com-mpls] static-lsp egress bj-sh l2vpn incoming-interface vlan-

 

interface 201 in-label 233 

static-lsp ingress lsp-name l2vpn nexthop next-hop-addr out-label out-label

undo static-lsp ingress lsp-name

MPLS view

lsp-name: Name of the LSP.

next-hop-addr: Address of the next hop.

out-label: Value of the out-label, ranging from 16 to 1,023.

Use the static-lsp ingress l2vpn command to create a static L2VPN LSP for the 
ingress LSR.

Use the undo static-lsp command to remove a static L2VPN LSP.

You need to create two LSPs (for transmitting and receiving) before creating a 
remote CCC connection.

Related command: static-lsp egress l2vpn, static-lsp transit, debugging mpls.

# Create a static LSP with the destination IP address of 202.25.38.1 for the ingress 
LSR.

[3Com-mpls] static-lsp ingress bj-sh l2vpn nexthop 1.1.1.1 out-label 100 

static-lsp transit lsp-name l2vpn incoming-interface vlan-interface vlan-id 
in-label in-label nexthop next-hop-addr out-label out-label

undo static-lsp transit lsp-name

MPLS view

lsp-name: Name of the LSP.

vlan-id: ID of the VLAN whose interface is to be used to create the LSP.

next-hop-addr: Address of the next hop.

in-label: Value of the in-label, ranging from 16 to 1,023.