3com 8807 Reference Guide

smac-address: Source MAC address of all the permitted ARP packets, expressed in 
dotted decimal format. It can be combined with other restrictive conditions at 
discretion. If it is set to all zeros, ARP packets of all source MAC addresses are 
permitted by default.

dmac-address: Destination MAC address of all the permitted ARP packets, 
expressed in dotted decimal format. It can be combined with other restrictive 
conditions at discretion. If it is set to all zeros, ARP packets of all destination MAC 
addresses are permitted by default.

Use the debugging arp packet command to enable the debugging for the 
permitted ARP packets.

Use the undo debugging arp packet command to disable the debugging 
output.

# Display and print the ARP packets whose source IP address is 8.8.8.1, destination 
address is 8.8.8.26 and source MAC address is 000a-ebf2-51a8.

<SW8800> debugging arp packet dip 8.8.8.26 sip 8.8.8.1 smac 000a-ebf

2-51a8 dmac 0-0-0 

# Disable the debugging output.

<SW8800> undo debugging arp packet 

display arp [ ip-address | [ dynamic | static ] [ | { begin | include | exclude } text 
] ]

Any view

dynamic: Displays the dynamic ARP entries in ARP mapping table.

static: Displays the static ARP entries in ARP mapping table.

ip-address: Displays ARP mapping entries according to specified IP address.

begin: Starts displaying from the first ARP entry that contains the specified 
character string "text".

include: Displays only the ARP entries that contain the specified character string 
"text".

exclude: Displays only the ARP entries that do not contain the specified character 
string "text".

text: Character string. The ARP entries that are related with this character string 
are displayed.