3com 8807 Reference Guide

mode: Specifies the VLAN based on other protocols.

The following protocols can be supported:

all: Supports all the protocols.

Use the protocol-vlan command to specify the parameters of VLANs based on 
AppleTalk, IPX, and so on.

Use the undo vlan-type protocol command to cancel this configuration.

Related command: display protocol-vlan vlan.

# Specify VLAN 5 based on AppleTalk.

[3Com-vlan5] protocol-vlan at 

display vlan-ip vlan { vlan-list | all }

Any view

vlan-list: Displays the information of a specified IP subnet-based VLAN, in the form 
of vlan-list = { vlan-id [ to vlan-id ] }.

all: Displays the protocol information and indexes of all the IP subnet-based 
VLANs.

Ethernet II-based VLAN 

ethernetii etype etype-id 

etype-id: Indicates the 
Ethernet type of an inbound 
packet, in the range of 600 to 
FFFF 

etype-id: Indicates the 
Ethernet type of an inbound 
packet, in the range of 600 to 
FFFF 

llc dsap dsap-id ssap ssap-id  dsap-id: Indicates a 

destination service access 
point, in the range of 0 to FF

ssap-id: Indicates a source 
service access point, in the 
range of 0 to FF 

SNAP-based protocol 

snap etype etype-id 

etype-id: Indicates the 
Ethernet type of an inbound 
packet, in the range of 600 to 
FFFF