3com 8807 Reference Guide
OSPF Configuration Commands
431
Tos 0 metric: 1
E type : 2
Forwarding Address: 0.0.0.0
Tag: 1
display ospf nexthop
Syntax
display ospf [ process-id ] nexthop
View
Any view
Parameter
process-id: Process ID of OSPF. The command is applied to all current OSPF
processes if you do not specify a process ID.
processes if you do not specify a process ID.
Description
Use the display ospf nexthop command to view the information about the
next-hop.
next-hop.
Example
# Display the OSPF next-hop information.
<SW8800> display ospf nexthop
OSPF Process 1 with Router ID 1.1.1.1
Address Type Refcount Intf Addr Intf Name
---------------------------------------------------------------------
202.38.160.1 Direct 3 202.38.160.1 Vlan-interface2
202.38.160.2 Neighbor 1 202.38.160.1 Vlan-interface2
Table 61 Description of the fields of the display ospf lsdb ase command
Field
Description
type
Type of the LSA
ls id
Link state ID of the LSA
adv rtr
Router ID of the router originating the LSA
ls age
Age of the LSA in seconds
len
Length of the LSA
seq#
Sequence number of the LSA
chksum
Checksum of the LSA
Options
Options of the LSA
Net mask
Network mask
E type
Type of external route
Forwarding Address
Forwarding address
Tag
Tag
Table 62 Description of the fields of the display ospf nexthop command
Field
Description
Address
Address of next hop
Type
Type of next hop
Refcount Reference count of the next hop, i.e., number of routes using this address as the
next hop
Intf Addr IP address of the outgoing interface to the next hop