3com 8807 Reference Guide
PIM Configuration Commands
633
neighbor-address: Neighbor address.
interface interface-type interface-number: Specifies interface.
Description
Use the reset pim neighbor command to clear a PIM neighbor.
Related command: display pim neighbor.
Example
# Clear the PIM neighbor 25.5.4.3.
<SW8800> reset pim neighbor 25.5.4.3
reset pim routing-table
Syntax
reset pim routing-table { all | { group-address [ mask group-mask |
mask-length group-mask-length ] | source-address [ mask source-mask |
mask-length source-mask-length ] | { incoming-interface interface-type
interface number | null } } * }
mask-length group-mask-length ] | source-address [ mask source-mask |
mask-length source-mask-length ] | { incoming-interface interface-type
interface number | null } } * }
View
User view
Parameter
all: All PIM neighbors.
group-address: Group address.
mask group-mask: Specifies group mask.
mask-length group-mask-length: Mask length of the group address.
source-address: Source address.
mask source-mask: Specifies source mask.
mask-length source-mask-length: Specifies mask length of the group address.
incoming-interface: Specifies incoming interface for the route entry in PIM
routing table.
routing table.
interface-type interface-number: Interface type and interface number, used to
specify the interface.
specify the interface.
Description
Use the reset pim routing-table command to clear a PIM route entry.
You can type in source address first and group address after in the command, as
long as they are valid. Error information will be given if you type in invalid
addresses.
long as they are valid. Error information will be given if you type in invalid
addresses.
If in this command, the group-address is 224.0.0.0/24 and source-address is the
RP address (where group address can have a mask, but the resulted IP address
RP address (where group address can have a mask, but the resulted IP address