3com 8807 Reference Guide

None

Use the terminal monitor command to enable the terminal display functions.

Use the undo terminal monitor command to disable the terminal display 
functions.

By default, the system enables the functions of debugging/log/trap information on 
the console and disable them on the terminal.

This command only takes effect on the current terminal where the commands are 
input. The debugging/log/trap information can be output to the current terminal, 
beginning in user view. When the terminal monitor is shut down, no 
debugging/log/trap information will be displayed in local terminal, which is equals 
to having performed undo terminal debugging, undo terminal logging, 
undo terminal trapping commands. When the terminal monitor is enabled, you 
can use terminal debugging / undo terminal debugging, terminal logging / 
terminal logging and terminal trapping / undo terminal trapping 
respectively to enable or disable the corresponding functions.

# Disable the terminal monitor.

<SW8800> undo terminal monitor 

User view

None

Use the terminal trapping command to enable terminal display function of trap 
information.

Use the undo terminal trapping command to disable this function.

By default, this function is enabled.

# Enable the terminal display function of trap information.

<SW8800> terminal trapping