3com 8807 Reference Guide

interface-type interface-number] }&<1-10>. interface-type is interface type, and 
interface-number is interface number. The interface-number after the keyword to 
must be larger than or equal to that before to. &<1-10> means that the preceding 
parameter can be repeated up to 10 times.

Use the display gvrp statistics command to view the GVRP statistics information 
of all the Trunk ports, including GVRP status information, failed GVRP registration 
entries and the last GVRP data unit origin.

# Display the GVRP statistics information on Ethernet2/1/1.

<SW8800> display gvrp statistics interface ethernet2/1/1

 

       GVRP statistics on port Ethernet2/1/1

 

                GVRP Status                    : Enabled

 

                GVRP Failed Registrations        : 0

 

                GVRP Last Pdu Origin            : 0000-0000-0000

 

                GVRP Registration Type          : Normal 

Any view

None

Use the display gvrp status command to view the global GVRP status 
information.

# Display the global status information about GVRP.

<SW8800> display gvrp status

 

     GVRP is enabled 

The above information means that the global GVRP is enabled.

Table 18   Description on the fields of the display gvrp statistics command

GVRP Status 

GVRP status, that is, enabled or disabled 

GVRP Failed Registrations 

Failed GVRP registration entries 

GVRP Last Pdu Origin 

The source of the last GVRP data unit. If GVRP data unit is not 
received, the system displays 0000-0000-0000; if received 
from a device, the GVRP data unit received last time is 
regarded as coming from this MAC address of this device. 

GVRP Registration Type 

GVRP registration type, that is, fixed, forbidden or normal