3com 8807 Reference Guide

hybrid: Displays Hybrid port.

trunk: Displays Trunk port.

Use the display port command to view the ports in the current system, whose 
link type is Hybrid or Trunk. If there is any such port, display the corresponding 
port name and the information about passing VLANs.

# Display the Hybrid ports in the current system and the information about passing 
VLANs.

<SW8800> display port hybrid

 

 Interface                 VLAN passing:

 

Ethernet3/1/1            Tagged  : 3, 5, 7, 9, 11

 

                            Untagged: 1-2, 4, 6,

 

Ethernet3/1/2            Tagged  : none

 

                            Untagged: 1 

The information above shows that the current system has two hybrid ports: 
Ethernet 3/1/1 and Ethernet 3/1/2. The tagged VLANs that pass Ethernet3/1/1 are 
3, 5, 7, 9, and 11, and the untagged VLANs that pass it are 1, 2, 4, and 6. No 
tagged VLAN passes Ethernet3/1/2, and untagged VLAN 1 passes Ethernet 3/1/2.

# Display the Trunk ports in the current system.

<SW8800> display port trunk

 

Interface                 VLAN passing

 

Ethernet3/1/3            1, 3-5, 10

 

Ethernet3/1/4            none

 

Ethernet3/1/7            1 

The information above shows that the current system has three Trunk ports: 
Ethernet 3/1/3, Ethernet 3/1/4, Ethernet2/1/7. The VLANs that pass Ethernet 3/1/3 
are 1, 3, 4, 5, and 10. No VLAN passes Ethernet 3/1/4. VLAN 1 passes Ethernet 
3/1/3.

duplex { auto | full | half }

Ethernet port view

auto: Port auto-negotiation attribute.

full: Port full-duplex attribute.

half: Port half-duplex attribute.