3com 8807 Reference Guide

Ethernet port view

agg-id: Aggregation group ID, in the range of 1 to 920. IDs 1 though 31 indicate 
manual or static aggregation groups; IDs 32 through 64 are reserved; IDs 65 
though 192 indicate Routed Trunks; IDs 193 through 920 indicate dynamic 
aggregation groups.

Use the port link-aggregation group command to add an Ethernet port into a 
manual or static aggregation group. Use the undo port link-aggregation group 
command to delete an Ethernet port from an aggregation group.

Related command: display link-aggregation verbose.

When a port is added into an aggregation group, the original ARP information of 
the port will be lost.

# Add Ethernet2/1/1 into aggregation group 22.

<SW8800> system-view

 

System View: return to User View with Ctrl+Z.

 

[SW8800] interface Ethernet2/1/1

 

[3Com-Ethernet2/1/1] port link-aggregation group 22 

reset lacp statistics [ interface interface-type interface-number [ to 
interface-type interface-number ] ]

System view

interface interface-type interface-number [ to interface-type interface-number ]: 
Specifies a port or ports. The command without the parameter to specifies one 
port, while the command with the parameter to specifies several contiguous 
ports. interface-type indicates port type. interface-number indicates port number. 
For more information, refer to the parameter description of the interface 
command.

Use the reset lacp statistics command to clear LACP statistics for the port. If you 
do not specify a port, the command clears LACP statistics for all the ports.

Related command: display link-aggregation interface.

# Clear LACP statistics for all Ethernet ports.

<SW8800> reset lacp statistics