3com 8807 Reference Guide

C

HAPTER

 12: MAC A

DDRESS

 T

ABLE

 M

ANAGEMENT

 C

OMMANDS

dynamic: Dynamic table entry, which will be aged.

interface-type: Specifies the interface type.

interface-number: Specifies the interface number.

count: the display information will only contain the sum number of MAC 
addresses in the MAC address table if user choice this parameter when using this 
command.

Use the display mac-address command to view MAC address table information.

When managing the Layer-2 addresses of the switch, the administrator can 
perform this command to view such information as the Layer-2 address table, 
address status (static or dynamic), Ethernet port of the MAC address, VLAN of the 
address, and system address aging time.

Related command: mac-address, mac-address timer.

# Show the information of the entry with MAC address at 00e0-fc01-0101

<SW8800> display mac-address 00e0-fc01-0101

 

MAC ADDR          VLAN ID  STATE          PORT INDEX   AGING TIME(s)

 

00e0-fc01-0101  1       Learned         Ethernet1/1/1    300 

mac-address { static | dynamic } mac-addr interface interface-type 
interface-number vlan vlan-id

undo mac-address [ static | dynamic ] [ mac-addr [ interface interface-type 
interface-number vlan vlan-id | interface interface-type interface-number | vlan 
vlan-id ]

System view

static: Static table entry, lost after resetting switch.

dynamic: Dynamic table entry, which will be aged.

mac-addr: Specifies the MAC address.

Table 24   Description on the fields of the display mac-address command on display

MAC ADDR 

The destination MAC address 

VLAN ID 

The VLAN of the MAC address 

STATE 

The state of the item, which can be Learned, Config static 

PORT INDEX 

The forwarding port 

AGING TIME(s) 

The aging time