3com 8807 Reference Guide
242
C
HAPTER
17: Q
O
S C
OMMANDS
rate: Port rate. This parameter is available only when you select interface-type
interface-number.
interface-number.
timeinterval: Interval for making statistics of rates, ranging from 1 to 5 seconds.
The default value is one second.
The default value is one second.
Description
Use the display qos-interface traffic-statistic command to view traffic statistics
of a port, including the target ACL, number of calculated packets etc.
of a port, including the target ACL, number of calculated packets etc.
Use the display qos-interface traffic-statistic rate command to display the
actual traffic rate on the port. The displayed information includes the ACL
corresponding to the traffic flow to be displayed and packet speed.
actual traffic rate on the port. The displayed information includes the ACL
corresponding to the traffic flow to be displayed and packet speed.
Related command: traffic-statistics.
Example
# Display average traffic rate in the latest three seconds on Ethernet7/1/1.
<SW8800> display qos-interface Ethernet7/1/1 traffic-statistic rate
3
Ethernet7/1/1: traffic-statistic
Inbound:
Matches: Acl 3000 rule 0 running
Last 3 second(s) rate: 12,574 packet(s)/sec, 12,875,776 bit(s)/sec
# Display traffic statistics information on port GigabitEthernet7/1/1..
<SW8800> display qos-interface GigabitEthernet7/1/1 traffic-statisti
c
GigabitEthernet7/1/1: traffic-statistic
Inbound:
Matches: Acl 2000 rule 0 running
12002688 bytes (green 1270244416 byte(s), yellow 1895874880
byte(s), red 704683968 byte(s) )
3333270 packets (green 0 byte(s), yellow 0 byte(s), red 0
byte(s) )
display qos-vlan all
Syntax
display qos-vlan [ vlan-id ] all
View
Any view
Parameter
vlan-id: ID of a VLAN, in the range of 1 to 4094.
Description
Use the display qos-vlan all command to display the QoS configuration
(including the configuration of priority marking, traffic policing, traffic redirection,
and traffic statistics) information about one specific VLAN (with vlan-id parameter)
or all VLANs (without vlan-id parameter) on the switch.
(including the configuration of priority marking, traffic policing, traffic redirection,
and traffic statistics) information about one specific VLAN (with vlan-id parameter)
or all VLANs (without vlan-id parameter) on the switch.