3com 8807 Reference Guide
RIP Configuration Commands
399
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
No peer router
Network :
202.38.168.0
filter-policy export
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ routing-protocol ]
undo filter-policy { acl-number | ip-prefix ip-prefix-name } export [
routing-protocol ]
routing-protocol ]
View
RIP view
Parameter
acl-number: Access control list number used for filtering the destination addresses
of the routing information.
of the routing information.
ip-prefix-name: Name of address prefix list used for filtering the destination
addresses of the routing information.
addresses of the routing information.
routing-protocol: Routing protocol whose routing information is to be filtered,
including direct, isis, bgp, ospf, ospf-ase, ospf-nssa and static at present.
including direct, isis, bgp, ospf, ospf-ase, ospf-nssa and static at present.
Description
Use the filter-policy export command to configure to filter the advertised
routing information by RIP.
routing information by RIP.
Use the undo filter-policy export command to configure not to filter the
advertised routing information.
advertised routing information.
By default, RIP does not filter the advertised routing information.
Table 53 Description of the fields of the display rip command
Field
Description
RIP is running
RIP is active
public net VPN-Instance
Public network in the VPN
Checkzero is on
Enable zero field checking
Default cost : 1
The default route cost is 1
Summary is on
Routes are summarized automatically
Preference : 100
The preference of RIP is 100
Traffic-share is off
Load balancing state for the interface
Period update timer : 30
Timeout timer : 180
Garbage-collection timer : 120
Three timers of RIP
No peer router
No destination address of a transmission is
specified
specified
Network :202.38.168.0
Enable RIP on network segment 202.38.168.0