3com 8807 Reference Guide
Command Line Interface Commands
41
Login users are classified into four levels that correspond to the four command
levels respectively. After users of different levels log in, they can only use
commands at the levels that are equal to or lower than its own level.
levels respectively. After users of different levels log in, they can only use
commands at the levels that are equal to or lower than its own level.
Related command: super password, quit.
Example
# change to user level 3 from the current user level.
<SW8800> super 3
Password:
super password
Syntax
super password [ level level ] { simple | cipher } password
undo super password [ level level ]
View
System view
Parameter
level: Specifies the entering password of the specified priority, ranging from 1 to 3.
The default value is 3, i.e. do not specify user level. It means the password to be
set is used for entering level 3.
The default value is 3, i.e. do not specify user level. It means the password to be
set is used for entering level 3.
simple: Displays the current password with plain text.
cipher: Displays the current password with cipher text.
password: If the authentication is in the simple mode, the password must be in
plain text. If the authentication is in the cipher mode, the password can either be
in encrypted text or in plain text. The result is determined by the input. A plain text
password is a sequential character string of no more than 16 digits, for example,
3com918. The length of an encrypted password must be 24 digits and in
encrypted text, for example, _(TT8F]Y5SQ=^Q‘MAF4<1!!.
plain text. If the authentication is in the cipher mode, the password can either be
in encrypted text or in plain text. The result is determined by the input. A plain text
password is a sequential character string of no more than 16 digits, for example,
3com918. The length of an encrypted password must be 24 digits and in
encrypted text, for example, _(TT8F]Y5SQ=^Q‘MAF4<1!!.
Description
Use the super password command to configure the password for changing the
user from a lower level to a higher level. In order to prevent unauthorized users
from illegal intrusion, user ID authentication is performed when users switch from
a lower level to a higher level. For the sake of confidentiality, on the screen the
user cannot see the password that he entered. Only when correct password is
input for three times, can the user switch to the higher level. Otherwise, the
original user level will remain unchanged. Use the undo super password
command to cancel the current settings.
user from a lower level to a higher level. In order to prevent unauthorized users
from illegal intrusion, user ID authentication is performed when users switch from
a lower level to a higher level. For the sake of confidentiality, on the screen the
user cannot see the password that he entered. Only when correct password is
input for three times, can the user switch to the higher level. Otherwise, the
original user level will remain unchanged. Use the undo super password
command to cancel the current settings.
The password in plain text is required when performing authentication, regardless
whether the configuration is plain text or encrypted text.
whether the configuration is plain text or encrypted text.
Example
# Configure the password to zbr for changing the user from the current level to
level 3.
level 3.