3com 8807 Reference Guide

C

HAPTER

 40: BGP/MPLS VPN C

ONFIGURATION

 C

OMMANDS

group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric 
characters.

peer-address: Peer IP address, in dotted decimal notation.

acl-number: IP ACL number from 2000 to 3999, that is, you can use basic or 
advanced ACL.

import: Performs the filtering policy on the received routes.

Use the peer filter-policy import command to apply the ACL-based filtering 
policy to the received routing information for peers.

Use the undo peer filter-policy import command to cancel the application.

By default, there is no ACL-based filtering policy.

Related command: ip as-path-acl and peer as-path-acl.

The incoming filtering policy configured for peers take precedence over the 
configuration for peer groups.

# Configure the test peer group to filter the received route with ACL 3000.

[3Com-bgp] ipv4-family vpnv4

 

[3Com-bgp-af-vpn] peer test filter-policy 3000 import 

peer peer-address group group-name [ as-number as-number ]

undo peer peer-address

VPNv4 sub-address family view, VPN-instance sub-address family view

group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric 
characters.

peer-address: Peer IP address in dotted decimal notation.

as-number: Peer AS number in the range of 1 to 65535. This parameter is only 
effective in the BGP view and VPN-instance sub-address family view.

Use the peer group command to add a peer to an existing peer group.

Use the undo peer command to delete a specified peer from the group.