3com 8807 Reference Guide

encapsulation { vlan | ethernet }

VSI view

encapsulation: Specifies the VC encapsulation type of the VSI.

vlan: Sets the encapsulation type of the VC to Ethernet Tagged mode.

ethernet: Sets the encapsulation type of the VC to Ethernet Raw mode. By 
default, it is in Ethernet mode.

Use the encapsulation command to specify the VC encapsulation type of the VSI. 
By default, the VC encapsulation type in the VSI takes this value.

# Specify the encapsulation type of VSI 3Com as VLAN.

<SW8800> system-view view

 

[SW8800] vsi 3Com static

 

[3Com-vsi-3Com] encapsulation vlan 

label-range label-range-id

VSI view

label-range-id: Specifies label range ID.

Use the label-range command to manually configure the label range ID 
corresponding to the VSI.

After label range redirection is configured, you can change the direction of VSI 
flow by changing the label range corresponding to the VSI, namely, redirect the 
new label range to the VPLS module for VSI flow processing so that the load on 
the VPLS module is shared.

Bandwidth 

VSI bandwidth limit 

Broadcast-restrain  Percentage of VSI broadcast suppression 

CoS 

Class of Service 

CoS-table 

Service registration mapping table of user priority on the PSN 

Mac-table limit 

Limit on the number of MAC forwarding entries of the VSI

Table 99   Detailed description on the fields of a VC