3com 8807 User Guide
Introduction to QoS Configuration Based on Port Groups
187
■
The XP4 card does not support inter-group port mirroring. A port group can
have an inbound and an outbound monitoring port. There is only one
monitoring port in other types of interface cards.
have an inbound and an outbound monitoring port. There is only one
monitoring port in other types of interface cards.
■
The XP4 card does not support queue scheduling.
Configuration Example
Network requirements
Set the next-hop address of the packets forwarded by GE7/1/1 and GE7/1/2 from
8:00 to 18:00 to 3.0.0.1.
8:00 to 18:00 to 3.0.0.1.
Network diagram
Figure 46 Example of configuring packet redirection
Configuration procedure
1 Define a time range.
# Define a time range from 8:00 to 18:00.
[SW8800] time-range 3Com 8:00 to 18:00 daily
2 Define the ACL rule of the PC packet.
# Enter ACL rule view identified with the number 2000.
[SW8800] acl number 2000
# Define the traffic classification rule.
[3Com-acl-basic-2000] rule 0 permit source any time-range 3Com
[3Com-acl-basic-2000] quit
3 Create a port group.
# Create a port group. The port group number is 1.
[SW8800] port-group 1
# Add GE7/1/1 and GE7/1/2 to port group 1.
GE7/1/8
GE7/1/1
GE7/1/2
VLAN2,
1.0.0.1/8
PC1
GE7/1/8
GE7/1/1
GE7/1/2
VLAN2,
1.0.0.1/8
PC1
VLAN3,
2.0.0.1/8
PC2
VLAN3,
2.0.0.1/8
PC2
3.0.0.1/8
PC3
GE7/1/8
GE7/1/1
GE7/1/2
VLAN2,
1.0.0.1/8
PC1
GE7/1/8
GE7/1/1
GE7/1/2
VLAN2,
1.0.0.1/8
PC1
VLAN3,
2.0.0.1/8
PC2
VLAN3,
2.0.0.1/8
PC2
3.0.0.1/8
PC3