3com 8807 User Guide

C

HAPTER

 4: U

SER

 I

NTERFACE

 C

ONFIGURATION

■

AUX user interface is numbered as the second interface designated as user 
interface 1.

■

VTY is numbered after AUX user interface. The absolute number of the first 
VTY is incremented by 1 than the AUX user interface number.

The relative number is in the format of "user interface type" + "number". The 
"number" refers to the internal number for each user interface type. This method 
can only specify one interface or one group of interfaces for a user interface type 
instead of different user interface types.

 It follows the rules below:

■

Number of Console user interface: console 0.

■

Number of AUX user interface: AUX 0.

■

Number of VTY: The first VTY interface is designated as VTY 0; the second one 
is designated as VTY 1, and so on.

The following sections describe the user interface configuration tasks.

■

■

■

■

■

■

■

The following command is used for entering a user interface view. You can enter a 
single user interface view or multi user interface view to configure one or more 
user interfaces respectively.

Perform the following configuration in system view.

The following command is used for configuring the displayed header when user 
login.

When the users log in to the switch, if a connection is activated, the login header 
will be displayed. After the user successfully logs in the switch, the shell header 
will be displayed.

Perform the following configuration in system view.

Table 7   Enter user interface view

Enter a single user interface view or multi user 
interface views 

user-interface [ type ] first-number [ 
last-number ]