3com 8807 User Guide
52
C
HAPTER
6: C
ONFIGURATION
F
ILE
M
ANAGEMENT
n
The configuration files are displayed in their corresponding saving formats.
Modifying and Saving
the
Current-Configuration
You can modify the current configuration of the switch through the CLI. Use the
save command to save the current-configuration in the Flash Memory, and the
configurations will become the saved-configuration when the system is powered
on for the next time.
save command to save the current-configuration in the Flash Memory, and the
configurations will become the saved-configuration when the system is powered
on for the next time.
Perform the following configuration in user view.
Even if the problems like reboot and power-off occur during , the configuration
file can be still saved to Flash.
file can be still saved to Flash.
Erasing Configuration
Files from Flash Memory
The reset saved-configuration command can be used to erase configuration
files from Flash Memory. The system will use the default configuration parameters
for initialization when the switch is powered on for the next time.
files from Flash Memory. The system will use the default configuration parameters
for initialization when the switch is powered on for the next time.
Perform the following configuration in user view.
You may erase the configuration files from the Flash in the following cases:
■
After being upgraded, the software does not match with the configuration
files.
files.
■
The configuration files in flash are damaged. (A common case is that a wrong
configuration file has been downloaded.)
configuration file has been downloaded.)
Configuring the Name of
the Configuration File
Used for the Next
Startup.
Perform the following configuration in user view.
Table 29 Display the configurations of the switch
Operation
Command
Display the saved-configuration information
of the switch
of the switch
display saved-configuration
Display the current-configuration information
of the Ethernet switch
of the Ethernet switch
display current-configuration [ controller |
interface interface-type interface-number |
configuration [ configuration ] ] [ | { begin |
exclude | include } regular-expression ]
interface interface-type interface-number |
configuration [ configuration ] ] [ | { begin |
exclude | include } regular-expression ]
Display the running configuration of the
current view
current view
display this
Table 30 Save the current-configuration
Operation
Command
Save the current-configuration
save [ file-name ]
Table 31 Erase configuration files from Flash Memory
Operation
Command
Erase configuration files from Flash Memory
reset saved-configuration