3com 8807 User Guide
DHCP Option 82 Configuration
707
Perform the following configuration in system view to configure Option 82
support on DHCP relay for multiple VLAN interfaces at the same time.
support on DHCP relay for multiple VLAN interfaces at the same time.
Option 82 Support on
DHCP Relay
Configuration Example
Network requirements
Two DHCP clients are on 10.110.0.0, and they acquire IP addresses from the DHCP
server through a DHCP relay device. The DHCP relay function is enabled on a VLAN
interface of the switch serving as the DHCP relay. Option 82 support is enabled on
the DHCP relay.
server through a DHCP relay device. The DHCP relay function is enabled on a VLAN
interface of the switch serving as the DHCP relay. Option 82 support is enabled on
the DHCP relay.
Configure the strategy for the
DHCP relay to process the
request packets that carry
Option 82
DHCP relay to process the
request packets that carry
Option 82
dhcp relay information
strategy { drop | keep | replace
}
strategy { drop | keep | replace
}
Optional
By default, the DHCP relay
adopts the strategy replace
to process the request packets
that carry Option 82. That is,
the DHCP relay replaces the
original Option 82 in the
packets with its own Option
82.
adopts the strategy replace
to process the request packets
that carry Option 82. That is,
the DHCP relay replaces the
original Option 82 in the
packets with its own Option
82.
Configure the mode of DHCP
Relay option 82
Relay option 82
dhcp relay information
format { normal | verbose }
format { normal | verbose }
Optional
The mode of DHCP Relay
option 82 is normal by
default
option 82 is normal by
default
Configure the user identifier
of DHCP Relay option 82
when it is in 3Com fixed
network mode
of DHCP Relay option 82
when it is in 3Com fixed
network mode
dhcp relay information
format verbose
node-identifier { mac |
sysname | user-defined
string <1-50> }
format verbose
node-identifier { mac |
sysname | user-defined
string <1-50> }
Optional
The user identifier of DHCP
Relay option 82 is the system
bridge MAC address by
default
Relay option 82 is the system
bridge MAC address by
default
Table 655 Enable Option 82 support on DHCP relay on the current VLAN interfaces
Operation
Command
Description
Enter system view
system-view
-
Enable Option 82 support on
DHCP relay
DHCP relay
dhcp relay information
enable
enable
{ interface vlan-interface
vlan-id [ to vlan-interface
vlan-id ] | all }
vlan-id [ to vlan-interface
vlan-id ] | all }
Optional
This feature is disabled by
default
default
Table 654 Enable Option 82 support on DHCP relay on the current VLAN interface
Operation Command Remarks