3com 8807 User Guide

C

HAPTER

 62: P

O

E PSU S

UPERVISION

 C

ONFIGURATION

# Enter system view.

<SW8800> system-view 

# Set the overvoltage alarm threshold of AC input for PoE PSUs to 264.0 V.

[SW8800] poe-power input-thresh upper 264.0 

# Set the undervoltage alarm threshold of AC input for PoE PSUs to 181.0 V.

[SW8800] poe-power input-thresh lower 181.0 

# Display the information about the AC input for the PoE PSUs.

[SW8800] display poe-power ac-input state 

You can set the DC output alarm thresholds for the PoE PSUs to enable the Switch 
8800 Family series to monitor the DC output voltages of the PSUs in real time 
through the PoE supervision module.

n 

■

Set the overvoltage alarm threshold of DC output for the PoE PSUs to 57.0 V.

■

Set the undervoltage alarm threshold of DC output for the PoE PSUs to 45.0 V.

# Enter system view.

<SW8800> system-view 

# Set the overvoltage alarm threshold of DC output for the PoE PSUs to 57.0 V.

Table 672   DC output alarm thresholds configuration tasks

1 

Enter system view 

 system-view 

- 

2 

Set the overvoltage alarm 
threshold of DC output 
(upper threshold) for the 
PoE PSUs 

poe-power output-thresh 
upper string 

Required, and the range is 
55.0 V to 57.0 V. 

3 

Set the undervoltage alarm 
threshold of DC output 
(lower threshold) for the PoE 
PSUs 

poe-power output-thresh 
lower string 

Required, and the range is 
45.0 V to 47.0 V. 

4 

Display the DC output state 
of the PoE PSUs. 

display poe-power 
dc-output state 

Optional, and you can 
execute this command in 
any view. 

5 

Display the DC output 
voltage/current value of the 
PoE PSUs 

display poe-power 
dc-output value 

Optional, and you can 
execute this command in 
any view.