3com 8807 User Guide
Displaying and Debugging SNMP
743
Setting the Size of the
SNMP Packet
Sent/Received by an
Agent
You can use the following commands to set the size of SNMP packet sent/received
by an agent.
by an agent.
Perform the following configuration in system view.
The agent can receive/send the SNMP packets of the sizes ranging from 484 to
17940, measured in bytes. By default, the size of an SNMP packet is 2000 bytes.
17940, measured in bytes. By default, the size of an SNMP packet is 2000 bytes.
Disabling SNMP Agent
To disable SNMP Agent, perform the following configuration in system view.
If users disable NMP Agent, it will be enabled whatever snmp-agent command is
configured thereafter.
configured thereafter.
Displaying and
Debugging SNMP
Debugging SNMP
After the above configuration, execute the display command in any view to
display the running of the SNMP configuration, and to verify the effect of the
configuration.
display the running of the SNMP configuration, and to verify the effect of the
configuration.
SNMP Configuration
Example
Example
Network requirements
Network Management Station and the switch are connected through the
Ethernet. The IP address of Network Management Station is 129.102.149.23 and
Ethernet. The IP address of Network Management Station is 129.102.149.23 and
Table 688 Set the size of the SNMP packet sent/received by an agent
Operation
Command
Set the size of the SNMP packet sent/received
by an agent
by an agent
snmp-agent packet max-size byte-count
Restore the default size of the SNMP packet
sent/received by an agent
sent/received by an agent
undo snmp-agent packet max-size
Table 689 Disable snmp agent
Operation
Command
Disable snmp agent
undo snmp-agent
Table 690 Display and debug SNMP
Operation
Command
Display the statistics information about SNMP
packets
packets
display snmp-agent statistics
Display the engine ID of the active device
display snmp-agent local-engineid
Display the group name, the security mode,
the states for all types of views, and the
storage mode of each group of the switch.
the states for all types of views, and the
storage mode of each group of the switch.
display snmp-agent group [ group-name ]
Display SNMP user information in the group
user table
user table
display snmp-agent usm-user [ engineid
engineid | group groupname | username
username ]*
engineid | group groupname | username
username ]*
Display the current community name
display snmp-agent community [ read |
write ]
write ]
Display the current MIB view
display snmp-agent mib-view [ exclude |
include | { viewname mib-view } ]
include | { viewname mib-view } ]
Display the contact character strings, location
character strings, and the SNMP version of the
system
character strings, and the SNMP version of the
system
display snmp-agent sys-info [ contact |
location | version ]*
location | version ]*